Datasheet

www.vishay.com For technical questions, contact: [e-mail] Document Number: 40005
48 Revision: 21-Nov-06
593D
Vishay Sprague
Solid Tantalum Chip Capacitors
T
ANTAMOUNT
®
Commercial, Surface Mount
for Switch Mode Power Supplies and Converters
FEATURES
• Terminations: 100 % Tin, Standard. SnPb
available
• Molded case available in five case codes
• Compatible with "High Volume" automatic pick
and place equipment
• High Ripple Current carrying capability
• Low ESR
• Meets EIA 535BAAE and IEC Specification
QC300801/US0001
Capacitance Range: 0.47 µF to 680 µF
Capacitance Tolerance: ± 20 %, ± 10 % standard
Voltage Rating: 4 WVDC to 50 WVDC
Compliant Terminations
100 % Surge Current Tested (B, C, D & E Case Sizes)
Effective September 2005, new capacitor ratings will not be
added to the 593D series. All new ratings are available in the
new TR3 series. The TR3 series offers state-of-the-art Low
ESR for switch Mode Power Supplies and DC/DC
Converters.
PERFORMANCE/ELECTRICAL CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
Note: Refer to Doc. 40088
ORDERING INFORMATION
593D 107 X9 010 D 2WE3
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE CODE TERMINATION AND
PACKAGING
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
(Special Order)
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an "R"
(6R3 = 6.3 volts).
See Ratings
and Case
Codes Table.
2TE3: 100 % tin terminations, 7" (178 mm) reel
2WE3: 100 % tin terminations, 13" (330 mm) reel
8T: 90/10 SnPb Solder Plate terminations,
7" (178 mm) reel
8W: 90/10 SnPb Solder Plate terminations,
13" (330 mm) reel
2T: Not recommended for new designs
2W: Not recommended for new designs
DIMENSIONS in inches [millimeters]
CASE CODE EIA SIZE L W H P T
W
T
H
(MIN.)
A 3216-18
0.126 ± 0.008
[3.2 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.047 ± 0.004
[1.2 ± 0.10]
0.028
[0.70]
B 3528-21
0.138 ± 0.008
[3.5 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.075 ± 0.008
[1.9 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.028
[0.70]
C 6032-28
0.236 ± 0.012
[6.0 ± 0.30]
0.126 ± 0.012
[3.2 ± 0.30]
0.098 ± 0.012
[2.5 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.039
[1.0]
D 7343-31
0.287 ± 0.012
[7.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.095 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
E 7343-43
0.287 ± 0.012
[7.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30
0.158 ± 0.012
[4.0 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.095 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
RoHS
*
COMPLIANT
Note: We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
L
T MIN.
H
H
W
T
W
P
* Pb containing terminations are not RoHS compliant, exemptions may apply
WELTRON Elektronik GmbH // Tel: [phone] // Fax: [phone] // E-Mail: [e-mail]
WELTRON Elektronik GmbH // Tel: [phone] // Fax: [phone] // E-Mail: [e-mail]