User`s guide

133
The Write to Measurement File should be configured as shown below. The filename in
this wizard will be overwritten by the input; it should “save to one file”; the format should be
text, with one header only or no headers; there should be only one time column; and the delimiter
should be comma.
Create a second Write to Measurement File module for frequency domain data. The steps
are the same as the other Write to Measurement File, so one could simple select all elements
connected to the previous module and edit the elements later. The two modules should share the
“Sample name” and Enable button. The filename of the second module should say frequency
domain.