Datasheet

128 SAL-RPM
Aluminum Capacitors
Solid Al, Radial Pearl Miniature
Vishay BCcomponents
Document Number: 28354 For technical questions contact: [e-mail]
www.vishay.com
Revision: 07-Nov-05 185
SELECTION CHART FOR C
R
, U
R
, U
C
AND RELEVANT MAXIMUM CASE SIZES (H x W x T in mm)
C
R
(µF)
U
R
(V) at T
amb
= 85 °C
6.31016253540
U
C
(V) at T
amb
= 125 °C
6.31016252525
0.1 -----10 x 7 x 3
0.15 -----10 x 7 x 3
0.22 -----10 x 7 x 3.5
0.33 ----10 x 7 x 3.510 x 7 x 4
0.47 ----10 x 7 x 410 x 7 x 5
0.68 - - - 10 x 7 x 3.5 10 x 7 x 4 10 x 7 x 5
1 - - - 10 x 7 x 3.5 10 x 7 x 5 10 x 8 x 5
1.5 - - - 10 x 7 x 3.5 10 x 8 x 5 10 x 8 x 6
2.2 - - 10 x 7 x 3.5 10 x 7 x 4 10 x 8 x 6 10 x 8 x 6
3.3 - - 10 x 7 x 3.5 10 x 7 x 5 10 x 8 x 6 -
4.7 - 10 x 7 x 3.5 10 x 7 x 4 10 x 8 x 5 - -
6.8 - 10 x 7 x 3.5 10 x 7 x 4 10 x 8 x 6 - -
10 10 x 7 x 3.5 10 x 7 x 4 10 x 7 x 5 10 x 8 x 6 - -
15 - 10 x 7 x 4 10 x 8 x 5 - - -
22 10 x 7 x 4 10 x 7 x 5 10 x 8 x 6 - - -
33 10 x 7 x 5 10 x 8 x 5 - - - -
47 10 x 8 x 5 10 x 8 x 6 - - - -
68 10 x 8 x 6 - - - - -
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig.2 Form CB: Short leads, in boxes.
The diameter of the mounting holes in the printed-circuit board is 0.8 ± 0.1 mm.
Flanges are provided with degassing grooves.
T
W
O 0.6
0.06
0.05
0.3
0.7
4.5
5.2 0.2
9.5 0.5
printed-circuit
board
Bottom view
The diameter of the mounting holes in the printed-circuit board is 0.8 ± 0.1 mm,
except for the hole of the anode lead of Form CA capacitors: 1.3 − 0.2 mm.
Flanges are provided with degassing grooves.
5.2 0.2
9 1
2 0.5
12.5
0.5
O 0.6
0.06
0.05
printed-circuit
board
T
W
Bottom view
1.0 0.1
0.25
0.05
9.5 0.5
Fig.3 Form CA: Long leads with keyed polarity, in boxes.
Table 1
Note
1. In plastic bags of 200 units each.
2. Detailed tape dimensions see section ‘PACKAGING’.
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
MAXIMUM
CASE SIZE
H × W × T
(mm)
CASE
CODE
MASS
(g)
PACKAGING QUANTITIES
FORM
CA
(note 1)
FORM
CB
(note 1)
FORM
TR+
FORM
TFA
10 × 7 × 310≈ 0.22 1000 1000 2000 1000
10 × 7 × 3.5 20 ≈ 0.25 1000 1000 2000 1000
10 × 7 × 430≈ 0.30 1000 1000 2000 1000
10 × 7 × 540≈ 0.35 1000 1000 1000 1000
10 × 8 × 550≈ 0.50 1000 1000 1000 1000
10 × 8 × 660≈ 0.60 1000 1000 1000 1000