Datasheet

ManualsBrandsVISHAY ManualsCapacitorsElectrolytic capacitor Radial lead 5 mm 4.7 µF 10 Vdc 20 % (Ø x H) 10 mm x 7 mm 1 pc(s)

www.vishay.com For technical questions contact: aluminumcaps2@vishay.com Document Number: 28354

184 Revision: 07-Nov-05

128 SAL-RPM

Vishay BCcomponents

Aluminum Capacitors

Solid Al, Radial Pearl Miniature

FEATURES

• Polarized aluminum electrolytic capacitors,

solid electrolyte MnO

• Radial leads, max. height 10 mm, resin dipped,

orange coloured

• Extremely long useful life, 20000 hours/125 °C

• Extended usable temperature range up to 175 °C

• Excellent low temperature, impedance and ESR behaviour

• Charge and discharge proof,

application with 0 Ω resistance allowed

• Reverse DC voltage up to 0.3 × U

allowed

• AC voltage up to 0.8 × U

allowed

• Advanced technology to achieve high reliability

and high stability.

APPLICATIONS

• EDP, telecommunication, general industrial,

automotive and audio-video

• Smoothing, filtering and buffering

• For small power supplies, DC/DC converters.

MARKING

The capacitors are marked (where possible)

with the following information:

• Rated capacitance (in µF).

• Tolerance on rated capacitance, code letter in accordance

with IEC 60062 (M for ± 20 %).

• Rated voltage (in V) and category voltage if applicable.

• Date code in accordance with IEC60062.

• Name of manufacturer.

• ‘I’ sign to indicate the negative terminal.

• ‘+’ sign to identify the positive terminal.

• Series Number.

MOUNTING

When bending, cutting or straightening the leads, ensure that

the capacitor body is relieved of stress.

Bending after soldering must be avoided.

128

SAL-RPM

axial

version

175 TMP

175 °C

solid SMD

123

SAL-A

Fig.1 Component outlines.

QUICK REFERENCE DATA

DESCRIPTION VALUE

Maximum case sizes

(H × W × T in mm)

10 × 7 × 3

to 10 × 8 × 6

Rated capacitance range

(E6 series), C

0.1 to 68 µF

Tolerance on C

± 20 %

Rated voltage range, U

6.3to40V

Category temperature range:

= 6.3 to 40 V − 55 to + 85 °C

= 6.3 to 25 V − 55 to + 125 °C

Endurance test at 125 °C 10000 hours

Useful life at 125 °C 20000 hours

Useful life at 175 °C 2000 hours

Useful life at 40 °C, I

applied > 300000 hours

Shelf life at 0 V, 125 °C 500 hours

Based on sectional

specification

IEC 60384-4/EN130300

Climatic category IEC 60068 55/125/56

*Pb containing terminations are not RoHS compliant, exemptions may apply

Available

Pb-free

RoHS*

COMPLIANT

Summary of content (10 pages)

PAGE 1
28 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature FEATURES • Polarized aluminum electrolytic capacitors, solid electrolyte MnO2 • Radial leads, max. height 10 mm, resin dipped, orange coloured Pb-free Available RoHS* COMPLIANT • Extremely long useful life, 20000 hours/125 °C • Extended usable temperature range up to 175 °C Fig.1 Component outlines.
PAGE 2
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature SELECTION CHART FOR CR , UR , UC AND RELEVANT MAXIMUM CASE SIZES (H x W x T in mm) CR (µF) 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 6.3 10 6.3 10 10 x 7 x 3.5 10 x 7 x 4 10 x 7 x 5 10 x 8 x 5 10 x 8 x 6 10 x 7 x 3.5 10 x 7 x 3.5 10 x 7 x 4 10 x 7 x 4 10 x 7 x 5 10 x 8 x 5 10 x 8 x 6 - UR (V) at Tamb = 85 °C 16 25 UC (V) at Tamb = 125 °C 16 25 10 x 7 x 3.5 10 x 7 x 3.5 10 x 7 x 3.
PAGE 3
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature TAPED PRODUCTS ELECTRICAL DATA CR IR IL5 Tan δ ESR Z rated capacitance at 100 Hz, tolerance ± 20 % max. RMS ripple current no necessary DC applied max. leakage current after 5 minutes at UR max. dissipation factor at 100 Hz; note 1 max./typ. equivalent series resistance at 100 Hz max. impedance at 100 kHz Note 1.
PAGE 4
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us ≤ 1.15 × UR Surge voltage Urev < 0.3 × UR Reverse voltage Maximum peak AC voltage reverse voltage applied Maximum peak AC voltage, without reverse voltage applied Tamb ≤ 85 °C: ≤2V at f ≤ 0.1 Hz 0.30 × UR at 0.1 Hz < f ≤ 1 Hz 0.45 × UR at 1 Hz < f ≤ 10 Hz 0.60 × UR at 10 Hz < f ≤ 50 Hz 0.65 × UR at f > 50 Hz 0.
PAGE 5
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature CAPACITANCE (C) TYPICAL CAPACITANCE CHANGE AFTER ENDURANCE TEST AT TAMB = 125 °C 1.2 4 ∆C (%) C C0 2000 h 2 1.1 5000 h standard deviation σ 0 1.0 0.9 0.8 10000 h -2 -4 -6 0.05 σ 0 0.7 0.6 -80 -40 0 40 80 120 Tamb (°C) -8 -10 160 0.01 0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.99 cumulative frequency (%) C0 = capacitance at 25 °C and 100 Hz. Fig.
PAGE 6
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature DISSIPATION FACTOR (tan δ) TYPICAL tan δ CHANGE AFTER ENDURANCE TEST AT TAMB = 125 °C 120 tan δ tan δ0 1.0 standard deviation σ 1.5 0.5 0.05 σ tan δ (% of initial requirements) 2.0 init. 100 2000 h 5000 h 10000 h 80 60 40 20 0 0 -80 -40 0 40 80 120 Tamb (°C) 0 0.01 160 0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.
PAGE 7
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature EQUIVALENT SERIES RESISTANCE (ESR) 10 3 10 3 ESR (W) Curve 1: 2.2 µF, 25 V. Curve 2: 4.7 µF, 16 V. Curve 3: 22 µF, 6.3 V. ESR (Ω) 10 2 Curve 1: 0.47 µF, 40 V. Curve 2: 3.3 µF, 25 V. Curve 3: 10 µF, 16 V. Curve 4: 33 µF, 6.3 V. 10 2 1 10 1 10 1 1 2 2 10 10 3 3 1 1 1 10 2 10 2 10 3 10 4 10 5 10 6 10 7 2 10 10 2 f (Hz) Case size H × W × T = 10 × 7 × 4 mm. Tamb = 25 °C. Fig.
PAGE 8
128 SAL-RPM Aluminum Capacitors Solid Al, Radial Pearl Miniature Vishay BCcomponents IMPEDANCE (Z) 10 3 Curve 1: 0.47 µF, 40 V. Curve 2: 3.3 µF, 25 V. Curve 3: 10 µF, 16 V. Curve 4: 33 µF, 6.3 V. Curve 1: 2.2 µF, 25 V. Curve 2: 4.7 µF, 16 V. Curve 3: 22 µF, 6.3 V. Z (Ω) 10 2 10 1 1 2 3 1 10 10 1 2 10 2 10 3 10 4 10 5 10 6 10 7 f (Hz) Case size H × W × T = 10 × 7 × 4 mm Tamb = 25 °C. Fig.20 Typical impedance as a function of frequency. Case size H × W × T = 10 × 7 × 5 mm.
PAGE 9
128 SAL-RPM Vishay BCcomponents Aluminum Capacitors Solid Al, Radial Pearl Miniature Table 3 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance Useful life REFERENCE IEC 60384-4/ EN130300 subclause 4.13 CECC 30302 subclause 1.8.1 PROCEDURE (quick reference) REQUIREMENTS Tamb = 125 °C; UR = 6.3 to 25 V with UR applied; UR = 35 and 40 V with UC applied; 10000 hours ∆C/C: ± 10 % Tamb = 125 °C; IR applied and: UR = 6.
PAGE 10
Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.