Datasheet

038 RSU
www.vishay.com
Vishay BCcomponents
Revision: 24-Apr-13
2
Document Number: 28309
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 1
Note
• Detailed tape dimensions see section “Packaging”.
SELECTION CHART FOR C
R,
U
R
, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
C
R
(μF)
U
R
(V)
6.3101625355063100
2.2 5 x 11 5 x 11
3.3 5 x 11 5 x 11
4.7 5 x 11 5 x 11
10 5 x 11 6.3 x 11
22 5 x 11 5 x 11 6.3 x 11
33 5 x 11 6.3 x 11 8 x 11.5
47 5 x 11 6.3 x 11 6.3 x 11 10 x 12
100  5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12 10 x 20
220 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12 10 x 16 13 x 25
330 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12 10 x 16 10 x 20 13 x 25
470 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12 10 x 16 10 x 20 13 x 20 16 x 25
1000 8 x 11.5 10 x 12 10 x 16 10 x 20 13 x 20 13 x 25 16 x 25 18 x 40
2200 10 x 16 10 x 20 13 x 20 13 x 25 6 x 25 16 x 31 18 x 35 
3300 10 x 20 13 x 20 13 x 25 16 x 25 16 x 35 18 x 35 
4700 13 x 20 13 x 25 16 x 25 16 x 31 18 x 35 
6800 13 x 25 16 x 25 16 x 31 18 x 35 
10 000 16 x 25 16 x 35 18 x 35 
22 000 18 x 40 
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 2 - Form CA Fig. 3 - Form CB:
Cut leads
Fig. 4 - Form TNA, Form TFA:
Taped in box (ammopack), straight leads
Fig. 5 - Form TFA:
Taped in box (ammopack), formed leads
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE
Ø d Ø D
max.
L
max.
F
MASS
(g)
PACKAGING QUANTITIES
FORM
CA
FORM
CB
FORM
TFA, TNA
5 x 11 11 0.5 5.5 12.5 2.0 ± 0.5  0.4 5000  2000
6.3 x 11 12 0.5 6.8 12.5 2.5 ± 0.5 0.6 5000  2000
8 x 11.5 13 0.6 8.5 12.5 3.5 ± 0.5 1.1 5000  1000
10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 1.6 3000 1000 500
10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5 1.9 2500 1000 500
10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5 2.2 2000 800 500
13 x 20 17 0.6 13.5 22.0 5.0 ± 0.5 4.0 1500 400 300
13 x 25 18 0.6 13.5 27.0 5.0 ± 0.5 5.0 1000 400 300
16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 750 200 200
16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5  9.0 600 200 200
16 x 35 21 0.8 16.5 37.5 7.5 ± 0.5 11.0 500 200 
18 x 35 22 0.8 18.5 37.5 7.5 ± 0.5  14.5 400 150 
18 x 40 23 0.8 18.5 42.0 7.5 ± 0.5  16.0 400 150 
Ø D
Ø d
F
15
min.
5
min.
L
Ø D
Ø d
4
+ 1
0
F
+
-
Dimen
sions of pitch F see Table 1 and Table 2
Case Ø D = 5 mm to 8 mm; pitch F is 5 mm