User`s manual

5. HOME SCREEN
The Home screen shows the preset number, its name, and the values of the following parameters: Tube Gain, Tube Level,
Parameter 1 and Parameter 2. This information is updated in real time when changing presets or when MIDI messages
are received that require modification. If the tube distortion is on, the symbol of the valve appears between the values
GAIN and LEVEL. Rotate the encoder knob to scroll through the 32 presets.
NO. PRESET NAME
01: GSi BURN
0 100 100 24
GAIN LEVEL PAR.1 PAR.2
6. LOCK FUNCTION
By holding down the EXIT/LOCK for about 2 seconds when the display shows the Home screen, you can put the unit in
Lock mode, that is, the encoder and the three buttons will be deactivated and the display backlight is off. The unit
remains in operation and continues to receive commands via MIDI and from the three pedals. To unlock the controls
press the EXIT/LOCK button again for 2 seconds.
7. EXTERNAL MODE
The EXT/ALT button activates the optional remote controller connected to the REMOTE jack. For more information, see
chapter REMOTE CONTROL.
8. EDIT MODE
Press the EDIT/ENTER key when the display shows the Home screen to enter the EDIT mode. The corresponding LED
turns on. In this mode you can set all the parameters for the preset, save or initialize the preset, and set all MIDI
parameters and global parameters.
There are different levels of EDIT:
– Level 1: scroll pages, display parameters
– Level 2: to change the value of a parameter
– Level 3: to change the value of a sub-parameter
– Level 4: only a few pages access this level, it is generally used to confirm an action
We move to the next level by pressing the EDIT/ENTER and you go back to a previous level by pressing EXIT / LOCK.
While adjusting a parameter, the EDIT/ENTER LED flashes and a cursor appears under the value of the parameter to be
changed.
Each page displays a parameter in the EDIT mode. The parameters can be of type:
1. numeric: you choose a value from 0 to 127 using the encoder
2. exclusive: alternate between two different selections using the EDIT/ENTER button (eg.: ON / OFF)
3. list: there can be multiple values to choose using the encoder
The pages are ordered according to the following list:
– Preset parameters
– [PRESET] functions for renaming, saving and initializing a preset
– [I/O] functions for settings about the connections
– [MIDI] settings
– [PEDAL] settings for the function of the three pedals BYPASS, STOP and SPEED
– Display contrast
– Information page, shows the firmware version
Some pages allow you to edit more data at once, such as the [MIDI] PC Map and the [MIDI] CC Assign.
GSi BURN USER'S MANUAL - Pag. 6/16