User Manual

EN - 14
User Manual
viscount
4.2 WHAT ARE PRESETS AND HOW TO USE THEM
The most famous electromechanic organs were also equipped with drawbars combinations through which
factory Presets could be used,
without the need to manually change the position of the drawbars. These
combinations, which back then could not be modified by the user, were
called Presets and could be accessed
through the first octave of the keyboard, characterised by inverted key colours and therefore called Black
Octave.
Legend has a Black Octave for each manual and includes 9 Presets, that can be recalled through the keys
from C# to A.
Legend Live has two Preset for each manual. To recall them, press the buttons [UPPER PRESETS 1] and
[UPPER PRESETS 2] for the upper manual, or [LOWER PRESETS 1] and [LOWER PRESETS 2] for the lower
manual.
As in the original organs, the pedalboard has no Preset.
EDITING AND SAVING PRESETS
To edit and store a
Legend Preset, follow these steps:
1. Select the Set A of the manual whose Preset you wish to edit, through the Black Octave of the
corresponding manual.
2. Configure the Preset to your liking by adjusting the drawbars of the Set A corresponding to that manual.
3. Press and hold the [TRANSPOSE SELECT] button, then simultaneously press the C key on the Black
Octave. The leds start to blink, indicating that the instrument is ready to save a Preset.
4. While still holding [TRANSPOSE SELECT], press the Black Octave key corresponding to the Preset you
want to edit and save.
5. Release [TRANSPOSE SELECT].
To edit and save
Legend Live Presets, follow these steps:
1. Press the [DRAWBARS SET A] button of the manual whose Preset you wish to edit.
2. Configure the preset to your liking by adjusting the drawbars of the Set A corresponding to the manual.
3. Press and hold the [TRANSPOSE SELECT] button, then simultaneously press the [DRAWBARS SET A]
button. The leds start to blink, indicating that the instrument is ready to save a Preset.
4. While still holding down [TRANSPOSE SELECT], press the button [UPPER PRESETS] or [LOWER
PRESETS] corresponding to the Preset you want to edit and save.
5. Release [TRANSPOSE SELECT].
FACTORY RESET PRESETS
Once a Preset is saved, the previous drawbar configuration contained therein is lost. To restore it, perform a
factory reset, which resets
ALL Presets to the original factory configuration.
To carry out the Factory Reset in Legend, switch on the instrument while pressing the buttons [TRANSPOSE
SELECT], [ROTARY DIRECT] and [ROTARY CLASSIC/ROCK], then release them after all the leds of the side
panels have blinked four times.
To carry out the Factory Reset in
Legend Live, switch on the instrument while pressing [TRANSPOSE
SELECT], [UPPER PRESETS 1] and [UPPER PRESETS 2], then release them after all the leds of the side panels
have blinked four times.
CANCEL FUNCTION
The C key
on the Black Octave in
Legend or pressing [DRAWBARS SET A] and [DRAWBARS SET B] in
Legend Live , recall the Cancel function, i.e. the Local Off of the instrument, through which it is possible to
disable the internal sound generation and allowing you to use the instrument as a master keyboard. In this
mode, the keyboard is sensitive to the strenght applied to the keys, so that notes transmitted by the [MIDI OUT
1] and [MIDI OUT 2] ports will have variable velocity.
NB
When a Factory Reset is performed, all the user-edited Presets will be irreparably lost.