User Manual

EN - 2
User Manual
viscount
1. IMPORTANT NOTES
1.1 PRODUCT CARE
 Do not apply excessive force to the instrument's structures and controls (knobs, buttons, keyboard etc...).
 Whenever possible, do not place the instrument close to units that generate strong interference, such as
radio - TV sets, monitors, etc ...
 Do not place the instrument close to heat sources, in damp or dusty places or in the vicinity of strong
magnetic fields.
 Do not expose the instrument to direct sunlight.
 Never insert foreign bodies or liquids of any kind into the instrument.
 For cleaning use only a soft brush or compressed air; never use detergents, solvents or alcohol.
 Always use good quality screened cables for connection to amplification or diffusion systems. When
disconnecting cables from sockets, always take hold of the connector and not the cable itself; when
winding cables do not knot or twist them.
 Before making connections make sure that the other units you are about to connect (especially
amplification and diffusion systems) are switched off. This will prevent noisy or even dangerous signal
peaks.
 Only use the external power adapter supplied with the instrument. Using an incorrect adapter may cause
damage.
 Make sure that the network voltage corresponds to the voltage specified on the instrument's power supply.
 If the instrument is to be out of use for long periods, disconnect the power cable from the power socket.
 Do not place the power cord near heat sources. Do not bend the cable too much, or damage it.
1.2 NOTES ABOUT THIS MANUAL
 Keep this manual with care.
 This manual is an integral part of the instrument. The descriptions and illustrations contained in this
publication are not binding.
 While the instrument’s essential characteristics remain the same, the manufacturer reserves the right to
make any modifications to parts, details or accessories considered appropriate to improve the product or
for requirements of a constructional or commercial nature, at any time and without undertaking to update
this publication immediately.
 All rights reserved; the reproduction of any part of this manual, in any form, without the manufacturer’s
specific written permission, is forbidden.
 All the trademarks referred to in this manual are the property of the respective manufacturers.
 Please read all the information carefully, so that you obtain the best performance and will from your
instrument.
 The codes or numbers in square brackets ([]) indicate the names of the buttons, sliders, trimmers and
connectors on the instrument. For example, [UPPER] refers to the UPPER button.
 The illustrations are purely for information purposes and may differ from your product.