User manual

-11-
4.4 Connecting to an Audio/Video device via AV Input
Turn off all devices before connecting or disconnecting any cables.
*Note:
To use the AV IN function of this device, please set it to AV IN mode first.
5. Basic Operation
Connect the device to the mains power, press POWER on the remote to turn on
the device, or press and hold POWER on the device for 1.5 seconds to turn it on.
Press POWER on the remote to turn off the device, or press and hold POWER on
the device for 1.5 seconds to turn it off.
Press MODE repeatedly to select between the following modes:
DTV: Freeview TV & Media Player, press RIGHT to change
ATV: Analogue TV, press RIGHT to change
AV IN: AV input, press RIGHT to change
BRIGHTNESS: Press LEFT or RIGHT to change
CONTRAST: Press LEFT or RIGHT to change
COLOR: Press LEFT or RIGHT to change
HUE: Press LEFT or RIGHT to change
SCALE: Press LEFT or RIGHT to change aspect ratio to 16:9 or 4:3
INVERT: Press LEFT or RIGHT to change the display to upside down or normal
5.1 Turning on/off the device
5.1.1 Turn power on
5.1.2 Turn power off
5.2 Mode settings
-12-
Right side of the device
Audio/Video input
AV cable (Included)
Connect to the Video
Output of the AV device
Signal flow
Black
Yellow
White
Red
Connect to the Audio Output
of the AV device