User manual

-23-
10. Analogue TV (ATV)
To search for Analogue TV, press MODE repeatedly until it shows ATV, press
LEFT or RIGHT to switch to the Analogue TV mode.
Press MENU, the ATV SETUP menu will show as follows:
Use UP/DOWN to select the TV FORMAT, AUTO SEARCH, SKP SWITCH,
FINE TUNE, press ENTER to confirm, press MENU to exit at any time during
the setting.
*Note：
Set the TV FORMAT to “PAL I” for UK.
10.2 AUTO SEARCH
The device will search for programs automatically if selecting AUTO SEARCH.
It will show as follows:
10.1 TV FORMAT
Use UP/DOWN to select the correct TV format for where you are, press
ENTER to confirm.
or
or
-24-
10.3 SKIP SWITCH
The SKIP SWITCH allows you to hide any channels, and they will be skipped
when selecting channels using CH+ or CH-.
Move to the channel you want to skip, press MENU, then select SKIP SETUP,
the following menu will show:
Use UP/DOWN to select SKIP ON, press ENTER to confirm, then press
MENU to exit.
To turn the SKIP OFF for a channel, press the channel's number, press MENU,
use UP/DOWN to select SKIP OFF, press ENTER to confirm, then press
MENU to exit.
10.4 FINE TUNE
The device will tune the program finely if selecting FINE TUNE.
Use LEFT/RIGHT to tune, and the following will show:
*Note:
If the signal is too weak, the image will remain poor whatever you do, and may
output loud noise, shaking images and inferior sound etc., which is not the
fault. If the image remains poor when using the telescopic antenna, please
use a roof top aerial or an amplified external antenna.
TV's
try to
11. Battery Compartment
This device has got a built-in battery compartment which takes 6 pieces of AA 1.2V
rechargeable batteries.
Fully charged batteries with 2700mAh capacity can support the TV watching
and video playback for up to 2.5 hours. Higher duty batteries work longer.