User manual

-18-
In Manual timer mode, press UP/DOWN
to select an option, use RIGHT/LEFT or
numbers to change the Date, Time, GMT
Offset or Summer Time.
After setting, press ENTER to confirm,
press MENU to exit the setup, it will show
“Successfully updated”.
6.3.5 Wakeup Timer
This option allows you to switch off / on the
device automatically, set a scheduled time
recording, or set a reminder for the program
you do not want to miss.
You can set Timer Mode, Wakeup Mode,
Wakeup Message, Wakeup Channel, Wakeup
Date, Time, Duration and Partition.
1. Timer No.: the number of this Wakeup
Timer setting, use LEFT/RIGHT to change.
2. Timer Mode: use LEFT/RIGHT to select
between Once, Daily, Weekly, Yearly or Off.
3. Wakeup Mode: use LEFT/RIGHT to choose
to show a message, switch to a channel you
want to watch, switch off/on the device or
set a scheduled TV recording.
Please note the device can only be switched on
automatically, after it was switched off through
the Wakeup Timer last time.
①
②
Wakeup Message: use LEFT/RIGHT to
select between Birthday, Anniversary or
General.
Wakeup Channel: use LEFT/RIGHT to
select a channel from the channel list.
4. Wakeup Date: press RIGHT to enter the
Calendar, use UP/DOWN/LEFT/RIGHT
to select a date.
5. On Time: use numbers to set the starting time.
6. Duration: use numbers to set how long you
want to watch or record the program.
7. Default Partition: this is for scheduled
recording only, press RIGHT, it will show
“Device List”, if the TV connects to an
USB stick, it only shows one device on the
list, if the TV connects to an external hard
drive which has number of partitions, it
will show the partition list, select the
appropriate, press ENTER, it will ask to
confirm whether to change, if you want to
change, select “Yes” then press ENTER,
otherwise select “No”. It will show “Set
successfully”.
After setting, press ENTER to confirm, press
MENU to exit the setup, it will show
“Successfully updated”.
6.3.6 Parental Lock
User can change system password under
this option.
-17-
6. Saturation: press RIGHT to enter the
list, use UP/DOWN to select, press
ENTER to confirm, press ENTER
again to exit the setting, or press UP
/DOWN to select another option.
4. Contrast: press RIGHT to enter the list,
use UP/DOWN to select, press ENTER
to confirm, press ENTER again to exit
the setting, or press UP/DOWN to select
another option.
5. HUE: press RIGHT to enter the list, use
UP/DOWN to select, press ENTER to
confirm, press ENTER again to exit the
setting, or press UP/DOWN to select
another option.
7. After setting, press ENTER to confirm,
press MENU to exit the setup, it will
show “Successfully updated”.
2. Aspect Ratio: press LEFT/RIGHT to select
between 16:9, 4:3 Pan Scan, 4:3 Letter
Box, press ENTER to confirm and exit the
setting. Or press UP/DOWN to select
another option.
3. Brightness: press RIGHT to enter the list,
use UP/DOWN to select, press ENTER to
confirm, press ENTER again to exit the
setting, or press UP/DOWN to select
another option.
Press UP/DOWN to select an option, use
LEFT/RIGHT to change the settings.
After setting, press ENTER to confirm,
press MENU to exit the setup, it will
show “Successfully updated”.
6.3.3 System Setup
6.3.4 Time
You can set EQ Setup, Surround, LCN
(Logical Channel Number) and Area in
System Setup.
You can set Timer Mode, Date, Time, GMT
Offset, and Summer Time under Time menu.
There are two Timer modes, one is Auto,
and one is Manual.
The system default is Auto timer mode,
press UP/DOWN to select Timer Mode or
GMT Offset, use RIGHT/LIFT to change.