User manual

-15-
6.5 Factory Default
To restore the system configuration to factory
default, press MENU, select Digital TV->
Factory Default, press ENTER.
It will ask whether you want to perform the
factory default, select [No] to cancel or select
[Yes] to confirm.
6.6 Version
This provides the hardware, software and
system information.
Enter the old password, if it is correct, the
cursor will move to Enter New Password
option, enter and confirm the new password.
The system will show “Password changed”.
The system default password is 0000.
6.4. Software Upgrade
This function is for manufacturer use only.
7. Digital TV Recording
The device supports recording Freeview TV
to a USB memory stick or external hard
drive (FAT32, USB2.0) via the USB port.
Before starting the recording, connect a USB
stick or external hard drive, which has
sufficient space left, to the device first.
7.1 Real Time TV Recording
Press REC on the remote to start the recording,
it will show “REC” on the screen, press REC
again to stop the recording, it will ask “Do
you want to stop recording”, choose “Yes” to
stop or “No” to carry on recording.
Press YELLOW during the recording, it allows
you to set the duration of the recording, press
RIGHT to choose: 15 min, 30 min, 45 min,
60 min, 75 min, 90 min, 105 min, 120 min or
disable, press ENTER to confirm and exit.
Press INFO during a recording to display how
long the device has been recording for, the
channel name and the remaining space left on
the USB storage device. Press INFO again to
cancel.
The recorded program is saved in a new folder
“PVR” in your USB stick or external hard
drive and is in MPG video format. It can be
viewed by pressing MENU then selecting
Movie.
Press MENU, then select Disk Manger, it
shows all the recorded programs stored in the
USB stick or external hard drive, press GREEN
repeatedly to select Play/Delete One/Delete All/
Rename a recorded program, press ENTER to
confirm, press MENU to exit at any time
7.2 Scheduled TV Recording
To set up a recording schedule, please make
sure the device is on digital Freeview TV mode
first. Then press MENU, select Digital TV by
pressing ENTER, select Configuration, and
then select Wakeup Timer. It shows the
following options:
English