User manual

-13-
6. Saturation: press RIGHT to enter the list,
use UP/DOWN to select, press ENTER to
confirm, press ENTER again to exit the
setting, or press UP/DOWN to select another
option.
4. Contrast: press RIGHT to enter the list, use
UP/DOWN to select, press ENTER to
confirm, press ENTER again to exit the
setting, or press UP/DOWN to select another
option.
5. HUE: press RIGHT to enter the list, use
UP/DOWN to select, press ENTER to
confirm, press ENTER again to exit the
setting, or press UP/DOWN to select
another option.
7. After setting, press ENTER to confirm,
press MENU to exit the setup, it will show
“Successfully updated”.
2. Aspect Ratio: press LEFT/RIGHT to select
between 16:9, 4:3 Pan Scan, 4:3 Letter Box,
press ENTER to confirm and exit the setting.
Or press UP/DOWN to select another option.
3. Brightness: press RIGHT to enter the list,
use UP/DOWN to select, press ENTER to
confirm, press ENTER again to exit the
setting, or press UP/DOWN to select another
option.
6.3.3 System Setup
6.3.4 Time
You can set EQ Setup, Surround, Antenna
Power, LCN (Logical Channel Number) and
Area in System Setup.
The device can output 5V power from the
coaxial aerial socket. Select Antenna Power
ON if your external aerial takes 5V input via
its coaxial plug.
Press UP/DOWN to select an option, use
LEFT/RIGHT to change the settings. After
setting, press ENTER to confirm, press MENU
to exit the setup, it will show “Successfully
updated”.
You can set Timer Mode, Date, Time, GMT
Offset, and Summer Time under Time menu.
There are two Timer modes, one is Auto,
and one is Manual.
The system default is Auto timer mode, press
UP/DOWN to select Timer Mode or GMT
Offset, use RIGHT/LIFT to change.
English