SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ｽｺﾅﾄｵ衂・IB_E(110420).
Feature of Your product Mechanism of ion generation Micro Plasma discharger generates Hydrogen and Oxygen ion (O₂-). - Ceramic electrode (+ electrode): Micro plasma discharger splits water molecules in the air and forms positively charged hydrogen atoms (H+). - Pin electrode (- electrode): High-voltage electric discharger emits electrons (e) which react with H+ and O₂ to form Hydrogen atom (H) and Oxygen ion (O₂-). - Hydrogen atom (H) and Oxygen ion (O₂-) together form Hydroperoxy radicals (HOO-).
Contents Before Using the Product Safety Information ........................................................................................................................................ 3 Checking the Components .................................................................................................................... 7 Checking the Parts........................................................................................................................................
Safety Information Please read and follow the instructions in this manual for safety of user and to prevent any possible damage or loss of property. ������� Hazards or unsafe practices that may result in severe personal injury or death. ������� Hazards or unsafe practices that may result in minor personal injury or property damage. Power supply ������� Never use a damaged power plug or loosened power receptacle. ▶ Potential risk of fire or electric shock.
Follow the direction carefully. Do not attempt. Unplug the power plug from the wall socket. Do not disassemble. Make sure the machine is grounded to prevent electric shock. Installing ������� Do not install the product in a place where flammable gas leaks or may potentially leak. ▶ Potential risk of explosion or fire. Installing ������� Do not install the product in uneven or sloped surface. ▶ If the product falls, it can be damaged or perform abnormally.
Safety Information(Continued) Operating ������� Do not apply shock or pull the appliance with excessive power. ▶ This may result in fire, injury or a problem with the product. If the appliance is flooded, contact nearest service center. ▶ Potential risk of fire or electric shock. If the product generates a strange noise, burning smell or smoke, unplug the power plug immediately and contact service center. ▶ Potential risk of fire or electric shock.
Operating ������� Do not touch the ion outlet while product is operating. ▶ Potential risk of product damage or electric shock. Ensure no water gets into the product. ▶ Potential risk or electric shock. ▶ If the water gets into the product, stop the operation and unplug the power cable. Do not use the supplied power cable with any other products. ▶ Potential risk of product damage or electric shock. Do not spray inflammable gases such as insecticide near the product.
Checking the Components The figure in this manual may differ from actual product. Main Unit Remote Controller Power Adapter Stand Wall Bracket Screws (6 ea) Anchor (6 ea) Clamping Bolt (1 ea) Cleaning Brush User’s Manual ※ Check if any contents are missing or damaged before using. ※ To purchase additional power adapter, contact our customer center (714-530-5791) Installing a battery 1 Open the battery holder on the back of the remote control.
Checking the Parts Check the names and functions of each part.
Installing the Product Wear protective equipment (gloves, safety glasses, etc.) for your safety. Installing a wall mount type (Preparations: Spirit level, pen or pencil, electric hammer drill, hammer and driver) 1 After locating the bracket to be attached on a wall, adjust it horizontally with a spirit level and mark the positions of 6 bracket holes with a pen. 2 Make holes (diameter: 6.5 mm) on the marked Electric Hammer Drill wall with an electric hammer drill.
5 After inserting the bracket bar on the rear side of the product into the bracket attached on the wall, fix the product with a clamping bolt. ▶ When fixing the product on the bracket, lift the Height/Angle Adjustment up to the maximum extent by taking account of product’s weight and center of gravity. 6 Plug the power adapter jack to the power input Power Cable Holders port and insert the power cable to the power cable holders in the correct direction that a power socket is located.
Installing the Product(Continued) Installing a stand type (Preparation: Screwdriver) 1 After inserting a bracket bar on the rear side of the product into the supplied stand, fix the product with a clamping bolt. ▶ When mounting the product on the stand, you can adjust the angle with the height/angle adjustment. 2 Plug the power adapter jack into the power input port and insert the power cable to the power cable holders in the correct direction that the power socket is located.
Operating the Product Learn how to use the buttons on the remote controller or the control panel. (Remote controller and control panel have same buttons and adjusts same functions.) SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ｽｺﾅﾄｵ衂・IB_E(110420).indd Powering on/off Turning on the power To start the operation, press [ ] button on the remote controller or control panel. ▶ The LED indicator is turned on along with the operation startup sound.
Operating the Product(Continued) Turning on/off the LED indicator To turn on/off the LED indicator, press [ ] button on the remote controller or control panel. ▶ If you press the button, the LED indicator is turned on or off along with a ‘ding’ sound. ▶ The stronger the ion strength is, the faster the blink speed of the LED indicator is. ▶ If you start the operation, the LED indicator is always turned on regardless of the previous setting.
Cleaning and Maintaining the Product Turn off the power and unplug the adapter before cleaning the product. SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ｽｺﾅﾄｵ衂・IB_E(110420).indd Cleaning the exterior Wipe the surface of the product with a slightly wet or dry cloth when needed. ▶ Use the cleaning brush to clean the dust or other foreign substances on the ion outlet. ● ������� Do not spray water directly on the product or use alkaline detergent and organic solvent (Benzene, thinner or alcohol) to clean the product.
Cleaning and Maintaining the Product (Continued) Cleaning the dust filter 1 Disassemble the power adapter jack from the power input port. 2 Disassemble the dust filter. ▶ As shown in the figure on the left, you can separate the dust filter by pulling it in the direction of the arrow. 3 Remove the dust accumulated in the dust filter with a cleaning brush. 4 After cleaning, assemble the filter again.
Troubleshooting Check the following list before reporting the problem. Problem Check Solution Make sure that the power is on Check if there is power failure. before trying again. Product is not operating. Strange odors permeate in the room during operation. Check if the power plug is properly connected. Connect the power plug properly and try again. Check if the adapter is working properly. Try another power receptacle.
Product Specification Model name SP-SA6 Dimension 419 X 80 X 246 mm Rated Voltage DC 12V exclusive adapter (Length X Width X Height) ● Due to ongoing improvement of the product, specification and design may change without prior notice. 17 SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ｽｺﾅﾄｵ衂・IB_E(110420).
Product Warranty Product warranty is for 1 Year About warranty service Mag & Brook,Inc. provide warranty service according to following guideline stated below. When the product repair is required, Mag & Brook,Inc. will provide warranty service and the detail status of the product will be notified within 7days and the refund or pro duct exchange will be done within a 14 days from repair request. Product Name Date of Purchase Model Name . . . Place of Purchase Serial No.
Distributor / Manufacturer : Mag & Brook, Inc. Device provider : Samsung Electronics Co., Ltd. Mag & Brook, Inc. Customer Service Center 714-530-5791 Let us know the product model, problem and the contact information. We will try to provide you with the fast and satisfying solution. SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ｽｺﾅﾄｵ衂・IB_E(110420).
