Product Support: Contact Virus Zero at 714-530-5791 Sales Inquiries: Contact Sylvane at (800) 934-9194 or visit sylvane.com SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ﾆ�ﾍｺ桒・IB_E(110420).
Feature of Your Product Mechanism of ion generation Micro Plasma discharger generates Hydrogen and Oxygen ion(O ₂-) - Ceramic electrode (+ electrode) : Micro plasma discharger splits water molecules in the air and forms positively charged hydrogen atoms (H+). - Pin electrode (- electrode) : High-voltage electric discharger emits electrons (e) which react with H+ and O₂ to form Hydrogen atom (H) and Oxygen ion (O₂-). - Hydrogen atom (H) and Oxygen ion (O₂-) together form Hydroperoxyl radicals (HOO-).
Contents Before Using the Product Safety Information.............................................................................. 3 Checking the Parts/Components ...................................................... 9 Basic Operation Installing the Product ........................................................................ 10 Operating the Product ...................................................................... 12 Other Information Cleaning the Product ........................................
Safety Information Please read and follow the instructions in this manual for safety of user and to prevent any possible damage or loss of property. ������� Hazards or unsafe practices that may result in severe personal injury or death. ������� Hazards or unsafe practices that may result in minor personal injury or property damage. Power supply ������� Never use a damaged power plug, dusted power cable or loosened power receptacle. ▶ Potential risk of fire or electric shock.
Follow the direction carefully. Do not attempt. Make sure the machine is grounded to prevent electric shock. Unplug the power plug from the wall socket. Do not disassemble. Installing ������� Do not place the product near hazardous substances or equipment that release free flames to avoid fire, explosions or injuries. ▶ Potential risk of explosion or fire. Installing ������� Do not install the product in uneven or sloped surface. ▶ If the product falls, it can be damaged or perform abnormally.
Safety Information (Cont’d) Operating (Residential) ������� Do not apply a shock or pull the appliance with excessive power. ▶ This may result in fire, injury or a problem with the product. If the appliance is flooded, contact nearest service center. ▶ Potential risk of fire or electric shock. If the product generates a strange noise, a burning smell, or smoke is emitted, unplug the power plug immediately and contact service center. ▶ Potential risk of fire or electric shock.
Operating (Residential) ������� If the power cable or the plug is damaged, the manufacturer or a qualified service technician must replace it. Make sure children does not touch or use the product. ▶ If the product falls, they NO! may get injured. Do not touch the ion outlet while product is operating. ▶ Potential risk of product damage or electric shock. Ensure no water gets into the product. Do not use the product in airtight space or place with young children or senior.
Safety Information (Cont’d) Operating (Automobile) Make sure the power is rated. DC12V ▶ Potential risk of electric shock or burn. Operating (Automobile) ������� Do not touch the metal part of the adapter. ▶ Potential risk of electric shock or burn. ������� Make sure the product is securely fixed (in a cup holder etc.) within the car. ▶ If the product falls, it can be dangerous and may cause accident. ▶ If the product falls, you may get injured and the product may get damaged.
Cleaning ������� Unplug the power before cleaning the product. ▶ Potential risk of personal injury or electric shock. Cleaning Unplug the power before changing the air filter. ������� Do not spray water directly on the product or use benzene, thinner or alcohol to clean the product. ▶ Potential risk of fire or electric shock. ▶ It may damage the surface of the product. Clean the dusts on the power plug pins. ▶ Potential risk of fire or electric shock. 올 SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ﾆ�ﾍｺ桒・IB_E(110420).
Checking the Parts/Components Make sure you have all the components included in your package and learn the part names of the product before using it.
Installing the Product Avoid direct sunlight when installing in the residence. For residential PUSH button (bottom) 1 Turn the product upside down and press the [PUSH] button. ▶ Pull the cover while pressing the [PUSH] button. ▶ Cover will be disassembled. 2 Connect the residential adapter to the power port. ▶ For stable performance, make sure to arrange the power cable through the bottom groove.
Installing the Product When using the product in an automobile, it is recommended to place the product on the cup holder. For automobile PUSH button (bottom) 1 Turn the product upside down and press the [PUSH] button. ▶ Pull the cover while pressing the [PUSH] button. ▶ Cover will be disassembled. 2 Connect the Car adapter to the power port. ▶ For stable performance, make sure to arrange the power cable through the top groove.
Operating the Product You can turn the power on/off and adjust the ion strength. SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ﾆ�ﾍｺ桒・IB_E(110420).indd Using the product 1 Press the [ ] button once. ▶ Product will turn on and the light will turn blue. Ion strength will set on (High) automatically. 2 Press the [ ] button again. ▶ Light will turn green. Ion strength will set on (Low). 3 Press the [ ] button again. ▶ Power and the light will turn off. Each time you press the button, function will change in following order.
Cleaning the Product Turn off the power and unplug the adapter before cleaning the product. Cleaning the exterior 1 Wipe the surface of the product with a slightly wet or dry cloth when needed. ▶ Use the cleaning brush to clean the dust or other foreign substances on the ion outlet. ● PUSH button (bottom) ������� Do not spray water directly on the product or use alkaline detergent and organic solvent (Benzene, thinner or alcohol) to clean the product.
Cleaning the air filter PUSH button (bottom) SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ﾆ�ﾍｺ桒・IB_E(110420).indd 1 Turn the product upside down and press the [PUSH] button. ▶ Pull the cover while pressing the [PUSH] button. ▶ Cover will be disassembled. 2 Remove the air filter located in the inside of the cover by pressing it down as arrow shows and then pulling it . 3 Clean the air filter with cleaning brush or running water. ▶ After cleaning the air filter in running water, dry it completely in the shade.
Troubleshooting Check the following list before reporting the problem. Problem Check Solution Check if there is power failure. Make sure that the power is on before trying again. Product is not operating. Strange odors permeate in the room during operation. Check if the power plug is properly connected. Connect the power plug properly and try again. Check if the adapter is working properly. Try another power receptacle. Check if the red light is blinking.
Product Specification Type Residential Automobile Both Model name SP-PD4 Series SP-PC4 Series SP-PA4 Series Dimension (Diameter X Height) Rated Voltage 63.4 x 159 mm AC220V DC12V AC220V/DC12V ● Due to ongoing improvement of the product, specification and design may change without prior notice. SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ﾆ�ﾍｺ桒・IB_E(110420).
17 SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ﾆ�ﾍｺ桒・IB_E(110420).
Product Warranty Product warranty is for 1 Year About warranty service Mag & Brook,Inc. provide warranty service according to following guideline stated below. When the product repair is required, Mag & Brook,Inc. will provide warranty service and the detail status of the product will be notified within 7days and the refund or pro duct exchange will be done within a 14 days from repair request. Product Name Date of Purchase Model Name . . . Place of Purchase Serial No.
Distributor / Manufacturer : Mag & Brook, Inc. Device provider : Samsung Electronics Co., Ltd. Mag & Brook, Inc. Customer Service Center 714-530-5791 Let us know the product model, problem and the contact information. We will try to provide you with the fast and satisfying solution. SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ﾆ�ﾍｺ桒・IB_E(110420).
