User`s guide

Installation and Preliminary Operations 26
Finishing OS Installation
After the proper partitioning of your hard drive(s), proceed in accordance with your OS
Installation Guide.
While on the
Network Configuration screen, you should ensure the correctness of the Hardware
Node’s IP address, host name, DNS, and default gateway information. If you are using DHCP,
make sure that it is properly configured. If necessary, consult your network administrator.
On the
Firewall Configuration screen, choose No firewall. Option Enable SELinux should be set to
Disabled.
Figure 5: Fedora Core Installation - Disabling Firewall and SELinux
After finishing the installation and rebooting your computer, you are ready to install OpenVZ on
your system.