User Manual

VirtuFit Ultimate Pro 2i Ergometer Rowing Machine
10
EN
CONSOLE
3. When you select the CUSTOM program, the
program defaults to a 20:00 minute default time.
4. Users can use the “UP / DOWN” button to change
the amount of time. Press the ENTER key when you are
nished.
5. When you select the CUSTOM program, the
program defaults to a 20:00 minute default time
6. You can use the “UP / DOWN” button to change the
amount of time. Press the ENTER key when you are
nished.
7. Once the number of strokes is set, the program
will default to 150 calories.
8. You can use the “UP / DOWN” button to change the
amount of calories. Press the ENTER key when nished.




9. Once the amount of calories is set, the program
will default to 2000 meters.
10. You can use the “UP / DOWN” button to change the
amount of meters. Press ENTER key when nished.

11. During the program, the TIME, STROKES, CALORIES, and
METERS displays will count down to zero and will stop at
zero.
12. Press the UP / DOWN button to display other metrics
such as the TOTAL TIME, AVG / 500M, AVG METER / STROKE,
MAX HR, MAX WATT, AVG WATT, CAL / HR, WATT CHART, and
FORCE CURVE in the middle window.
13. If you stop rowing, the time shown on the lower right
window of monitor will pause. When you start rowing again,
it will continue operating from where you left o.
14. Press the STOP button to pause the monitor.