Ultimate Pro 2i Ergometer Rowing Machine User manual - console EN
INDEX CONSOLE 3 - 10 APPS 11 VirtuFit Ultimate Pro 2i Ergometer Rowing Machine EN 2
CONSOLE CONSOLE ROWING MACHINE METERS SPM (Strokes Per Minute) Displays total distance rowed in meters Displays strokes per minute (stroke rate) PULSE CALORIES Displays heart rate when connected to a heart rate monitor Displays total calories WATTS STROKES Displays watts per pull Displays total number of strokes TIME/500M TIME Displays projected time needed to complete 500 meters based on current stroke Displays amount of time spent rowing (does not count rest) LARGE TOGGLE DISPLAY FOR 9 PE
CONSOLE 1. Press START to turn on console. You will see “PRESS START TO QUICKSTART OR SELECT PROGRAM” on the meter display 2. To choose QUICKSTART, press again and begin your workout. 3. To choose a program, press the “UP/ DOWN” key to make your program selection between the following programs: QUICKSTART / RACE / INTERVAL / TIME / DISTANCE / CUSTOM 1. QUICKSTART 1. The monitor will default to the QUICKSTART mode when you press “START/STOP” or start rowing and do not choose a program. 2.
CONSOLE 1. QUICK - PROGRAM 1. The monitor will default to the QUICKSTART mode when you press “START/STOP” or start rowing and do not choose a program. 2. During use, the monitor will display the following metrics TIME / STROKES / CALORIES / METERS / WATTS / TIME/500M / PULSE / STROKES PER MINUTE (SPM) 3. Press the UP / DOWN button to display other metrics such as the TOTAL TIME, AVG / 500M, AVG METER / STROKE, MAX HR, MAX WATT, AVG WATT, CAL / HR, WATT CHART, and FORCE CURVE in the middle window 4.
CONSOLE 5. During the RACE program, the following metrics “TIME / STROKES / CALORIES / WATTS /” will count up. The METERS metric will count down to your target race distance. 6. During the race, the dot matrix will show YOUR position and the COMPUTER’s position; the monitor will display the meter distance between the two. After the end of the race, the computer will show either the COMPUTER or YOU as the winner. 7. If you stop rowing, the time shown on the lower right window of monitor will pause.
CONSOLE 5. During the RACE program, the following metrics “TIME / STROKES / CALORIES / WATTS /” will count up. The METERS metric will count down to your target race distance. 6. During the race, the dot matrix will show YOUR position and the COMPUTER’s position; the monitor will display the meter distance between the two. After the end of the race, the computer will show either the COMPUTER or YOU as the winner. 7. If you stop rowing, the time shown on the lower right window of monitor will pause.
CONSOLE 4. TIME – PROGRAM 1. In the start menu, use the “UP / DOWN” key to select TIME, and then press the ENTER key to choose the program. 2. When you select the TIME program, the program defaults to a time of 20 minutes. 3. You can use the “UP / DOWN” button to change the amount of time. Press the ENTER key when finished. 4. During the program, the TIME display on the bottom right will count down to 0:00. The STROKES, CALORIES, and METERS metrics will count up. 5.
CONSOLE 2. When the user selects DISTANCE program, the program will default to a target distance of 2000 meters. 3. GUsers can use the “UP / DOWN” button to change the target distance. Press the ENTER key when finished. 4. Press START key to begin the program. During the program, the METERS display on the top center will count down to zero. The TIME, STROKES, CALORIES displays will count up. 5.
CONSOLE 3. When you select the CUSTOM program, the program defaults to a 20:00 minute default time. 4. Users can use the “UP / DOWN” button to change the amount of time. Press the ENTER key when you are finished. 5. When you select the CUSTOM program, the program defaults to a 20:00 minute default time 6. You can use the “UP / DOWN” button to change the amount of time. Press the ENTER key when you are finished. 7. Once the number of strokes is set, the program will default to 150 calories. 8.
APPS INSTRUCTION 1. QR code scanner app is required to scan the QR code with an Android or IOS phone or tablet. This app can be downloaded in the App Store or Google Play Store. 2. Scan one of the QR codes below to go directly to the place in the App Store or Google Play Store where the app is located and can be downloaded. 3. Scan the QR code on the right to go to the user manual of the app.
For questions or missing parts please contact your dealer.
