Users Manual Part 1

~ ~21~ ~2
II. Brief Introduction to External Labels
Please assemble, use and maintain this roduct in strict accordance with regula-P
tions below to keep safety since electric shock or fire hazard may be incurred by impro-
per operations,even if we have attached much attention to personal safety in design and
manufacturing stage. Please carefully read the safety instructions below before using it.
RSK ELSCTRIC SHOCK
Warning: This Product is highly sensitive!
Please keep it away from rainwater or humidity to keep
out electric leakage or fire alarm. Never open shell
without permission; otherwise, electric shock may be
incurred by high-voltage wire inside.
I. Outline Drawing
(For illustrative purposes only and may differ from the actual product)
Warning
LCD Touch AIOLCD Touch AIO
Click one positioning mode to
enter the positioning of electric
whiteboard.
<As shown in the left figure>
Click Device positioning ”“
button or click service program
icon select Positioning”option , “
< to pop up the window as shown
>.in the left figure
2?Positioning
1?Display and Replacement of Current Series
Click Current series”and choose“
AIO series ; then click Enable “
device” button;after connection is
, done the window will be changed
< >.as shown in the left figure
3 Shortcut Configuration.
.Click”Configuration” button to change corresponding functions of shortcuts of AIO
4 Exit Server Program.
Click”Disable” button to exit the server program and the tray icon of system will
disappear.
5 Enable Whiteboard at Startup.
Tick”Enable device at startup” to automatically connect and enable service pro- AIO
gram at the next startup .
Please click the center of positioning
,cursor using whiteboard pen the green
light circle will gradually become orange;
when entire circle becomes orange the ,
positioning is finished and positioning
cursor will be automatically moved to
.the next point
( ).as shown in the left figure
Repeat the above action,until the positioning of all points is finished.