LCD Touch AIO User’s Manual 公司网站：http://www.donviewware.com P/N: 4.80.01.1047-0501 VER : 1.
LCD Touch AIO XVI. Faults and Troubleshooting No power Check if AC power wire of this Product is well inserted into power socket. However, if it still has no power, unplug the power plug and wait for 60s before reinsert it, then start the machine. No picture Check the connection of antenna at rear side of machine and try other channels.
LCD Touch AIO XV. Product Upgrade & Maintenance Introduction to product upgrade and module replacement : System upgrade : Online upgrade : such upgrade shall be compatible to the current AIO and version and enough storage space shall be reserved for downloading and installation . Local upgrade : the upgrade package which is from existing external device directory and compatible to this TV is used for local upgrade . Module replacement : 1 .
LCD Touch AIO I. Outline Drawing (For illustrative purposes only and may differ from the actual product) LCD Touch AIO 1?Display and Replacement of Current Series Click“Current series”and choose AIO series ; then click “Enable device” button;after connection is done , the window will be changed < as shown in the left figure >. 2?Positioning Click“Device positioning ” button or click service program icon , select“Positioning”option to pop up the window < as shown in the left figure >. II.
LCD Touch AIO LCD Touch AIO XII. Installation of Electric Whiteboard in Computer System 1 . Introduction to installation of electric whiteboard software CD WhiteBoard electric whiteboard software includes 2 CD : Electric whiteboard software ( Junior version) : applicable to kindergarten and junior schools; Electric whiteboard software ( general version) : applicable to junior high school , senior high school , vocational school , colleges and universities and other industries . 2 .
LCD Touch AIO LCD Touch AIO 6 . Operation of remote controller Never cover receiving window of remote controller or expose it to strong sunlight to keep good receiving sensitivity. 7. Notices for dry cells of remote controller RSK ELSCTRIC SHOCK The service life of dry cells is around 1 year (depending on your frequency of use). In case remote controller is faced with short operation distance and low flexibility, please replace both old cells of it.
LCD Touch AIO 5.Settings and about 5.1、Main toolbar settings The user can customize the main toolbar icons by tapping Settings -Main Toolbar Icon Settings to open the main toolbar icon settings window, as shown below: LCD Touch AIO 4.7 K eep this P roduct free from long contact with rubber to protect this Product against shell metamorphism or coating peeling. 4.8 This Product is applicable to 220VAC 4.
LCD Touch AIO 5.4 This P roduct shall be handled by at least two persons.It is needed to unplugthe power wire plug,remove antenna and other devices before handling . It shall be handled with caution to avoid impact or screen damage. 5.5 Never stand or sit on this Product. For family with children,much attention shall be attached to preventing children from climbing or playing the TV to avoid displacement, overturning, damage or other injuries. 5.
LCD Touch AIO LCD Touch AIO : Blue,red and black pens,which can be tapped to quickly switch the pen colors. : P en color settings, which offer various color options and take effect after the color is selected,the brightness is adjusted and OK is tapped. : Pen size, including 5, 20, and 50. : Pen size settings, which offer sizes 1-80. : C urve,which allows a switch from Draw status to Annotate status without changing the solid or dashed line setting of the pen.
LCD Touch AIO In the first method, it should be connected through the following steps: 1) C onnect VGA wire end to the VGA out- put port at left side (or right side) of AIO ,and connect another end to VGA end of PC . 2 )Connect the end of USB wire to“ TOUCH USB ” end at left side of AIO , connect flat end of USB to the USB port(touch is available if this end is connected) of external PC .
LCD Touch AIO 5、Use of Whiteboard Software in Android System WhiteBoard for Android is a practical software installed on the Android OS ,which integrates such features as annotating,drawing, saving picture and saving annotation. It is easy to operate with simple icons, and allows commenting on the Android OS. LCD Touch AIO Left control panel USB USB USB TOUCH HDMI TYPE-C 1、Operating environment WhiteBoard for Android supports Android 5.0 and higher.
LCD Touch AIO LCD Touch AIO 4、Use of floating menu IX. Introduction to Ports at Rear Side TYPE-C RS232 Earphone RJ45 Out RJ45 In COAX OUT DP TOUCH DP S/N Port Name Function 1 TYPE-C interface on TV/Android/OPS system(Public USB3.
