Tus neeg siv phau ntawv

TQ3+ | User's manual

OPTION B: In-game Conﬁguration

Below, you have a general scheme to set up your TQ3/

TQ3+ with the most popular ﬂight simulation software: MSFS,

Prepar3D, and X-Plane 11/12.

MSFS

If you own a TQ3 PLUS version, your device is ready to be

used in MSFS. If you own a TQ3 non-PLUS version, open

MSFS and go to the options menu. Select the controls menu,

chose the TQ3 from the device list, and assign the axes as

you please.

Prepar3D

Open Prepar3D and go to the “Options” menu. Locate the

“Key Assignments” and “Axis Assignments” and select the

“TQ3/TQ3+” from the Controller list. Assign the axes as you

please. Calibrate the device following the instructions inside

“Control Calibration”.

X-Plane 11/12

You will only need to calibrate your TQ3/TQ3+ inside X-Plane

11/12, since axes and reverse zones are automatically assigned.

Open X-Plane and go to the Settings\Joystick sub-menu,

select the TQ3/TQ3+ from the device list and follow calibration

steps for your device.

If you own a TQ3 non-PLUS version, you must calibrate

your device using Windows Calibration.

If you want to customize how your TQ3/TQ3+ works,

select the device’s options button ( ) in VFHub’s

Dashboard. For detailed instructions on all the tuning and

customization possibilities, check the USER’s MANUAL

button in the VFHub software.

Make sure the “Enable Controllers” option inside

Options/Controls is enabled.

The reverse zones are not available with the in-game

conﬁguration for MSFS and Prepar3D.