Tus neeg siv phau ntawv
TQ3+ | User's manual
4
3. SOFTWARE SETUP
The TQ3/TQ3+ interacts with any computer as a joystick (HID),
so it is compatible with any flight simulation software. Below,
you have 2 options for setting up your TQ3/TQ3+ with the
most popular flight simulation software: MSFS, Prepar3D, and
X-Plane 11/12.
OPTION A: Using VFHub (Windows Only) - Recommended
VFHub is the software developed by Virtual Fly to simplify
setting up our products. Thus, it is the recommended software
to set up your TQ3/TQ3+. With VFHub, you can fly your favorite
flight simulation software without worrying about configuring
your Virtual Fly flight controls.
You can download the latest VFHub version from this link:
https://www.virtual-fly.com/setup-support. The VFHub installer
takes care of installing VFHub and all the required modules.
VFHub is compatible with MSFS, Prepar3D
V4-V5
and X-Plane
11/12.
After installing VFHub, make sure your TQ3/TQ3+ is connected
to your computer. Run VFHub, and verify that the TQ3 status
displayed in the Dashboard is “Connected”:
VFHub takes care of making your TQ3/TQ3+ work with MSFS,
Prepar3D
V4-V5
and X-Plane 11/12, so it must always be running
when you use the TQ3/TQ3+.
Make sure to use set up a blank profile to the TQ3/
TQ3+ in the controls or joystick menu of the simulation
software you are using. You can find the detailed steps
in: https://downloads.virtual-fly.com/docs/vub/latest/
setting_up_a_blank_profile.pdf.
If your device is a TQ3 non-PLUS version, make sure to
calibrate the device in VFHub. For more details, check
the USER’s MANUAL button in the VFHub software: