Tus neeg siv phau ntawv
TQ3+ | User's manual
3
2.2 CONNECTING TO PC
Connect the integrated USB cable from the TQ3/TQ3+ to the
computer where the flight simulation software is running.
2.3 ADJUSTING THE LEVER’S HARDNESS
Your TQ3/TQ3+ oers the possibility to adapt the levers’
hardness to your preference.
You can do so by rotating the knob (b) as seen in the following
diagram. The knob is located on the right side of the TQ3/
TQ3+. Once you have adjusted the knob, move all the levers
simultaneously from top to bottom, at least five times, to
distribute the hardness.
b