User manual
Table 7: SPID Formats
SPID format Switch type Comment
All SPIDs are “0”
Matches any SPID on the TE side
Supported by NI-1, DMS-
100, 5ESS
Troubleshooting use
All SPID are empty Supported by NET3 only Standard
Any sequence of 40 digits.
Supported by NI-1, DMS-
100, 5ESS
Standard
Upgrading Firmware
Virtual Consoles will periodically publish software upgrades. Check the website for new versions of the
upgradable TMS le shown in Figure 9. When you download new rmware, check if there is a newer version
of ISDN Manager and upgrade that as well.
Clicking the “upgrade” tab for your product will download a ZIP le containing three les (Table 8). XLOAD is
the actual loader.
Table 8: Firmware Upgrade
File Function & comments
XLOAD.EXE Firmware loader
XXXXX.XMD Firmware, where XXXXXX is a platform specic designation.
DEV.CFG Device default conguration le
To load new rmware with the XLOAD program, connect a COM port of a PC to the console port of the
simulator. The XLOAD program must have exclusive use of the COM port; no other application may use it
while the upgrade program is running.
Example:
XLOAD.EXE P2US.XMD /Com:1 /Cfg:DEV.CFG
at the Windows DOS command prompt. In this example, the Virtual Console device is connected to COM1
port and loads the default settings from the DEV.CFG le.
17
User Manual
2 Port ISDN Simulator