User manual

or ”PPPoE”.Usually the router functions as a border router for SOHO or home networking so you
must enter your settings here to enable access to the Internet.
2. LAN Port IP Address: Modifies the IP address of the gateway.
3. VoIP Call Setup: VoIP users need to set phone/line port numbers. If user selects “H.323”,
please set Gatekeeper IP address or Direct Call Plan. The other way, user select “SIP”, please
set SIP Proxy Server IP address or Direct Call Plan.
Advanced Configuration:
The following settings are for advanced configurations.
Network Setup:
1. WAN Type Setup: Sets/changes the WAN port Type like “Fixed IP”, “DHCP Client”
or ”PPPoE”.Usually the router functions as a border router for SOHO or home networking so you
must enter settings here to enable access to the Internet.
2. LAN Port IP Address: Modifies the IP address of the gateway and setting DHCP Server.
VoIP Setup
1. VoIP Basic Set
The N/T 4000 Series Gateway support 4 phone/line port (3 FXS + 1 FXO, 2 FXS + 2 FXO, 1 FXS
+ 3 FXO) and N/T 2000 supports 2 phone/line port (1 FXS + !FXO ) for H.323 or SIP VoIP call
applications. You can manage these ports from this menu.
2. Dial Plan Setup
Users could apply any dial policy by setting Dial Plan including outgoing dial plan and incoming
dial plan.
3. Advanced Setting
The VoIP Gateway support for silence compression, DTMF Relay, Codec Selection, FAX mode
Option, H323 Register Type and H.323 Fast-Start/Normal-Start function in this item.
4. Auto Dial Setting
Enable user to set up “hotline” to dial the phone number.
5. Port Status
Display the telephone interface status
System Administration:
1. Save Configuration and Reboot System.
You can save configuration and restart the gateway with the default configuration or with
the current running configuration.
2. Access Control:
Users can Sets/changes the administrator password.
3. Set to Default:
You can restart the gateway with the default configuration.
4. Backup/Restore Configuration File:
User can backup the configuration file to PC (MS-OS) or Restore the configuration file from PC
(MS-OS).
5. System Information:
GW gateway display system information like MAC Address, VoIP Status and WAN port Type
Status.
3 Wizard Setup for Quick Start
Wizard Setup
After finishing the authentication, the Main menu will display 3 parts of
configuration, please click “Wizard Setup” to enter quick start:
3.1 WAN Port Type Setup
(Setup First)
For most users, Internet access is the primary application. The N/T Series Gateway