User manual

1
Getting Started
1.1 Introduction
This VoIP Gateway provides a total solution for integrating voice-data network and PSTN. By simple
installation, The VoIP Gateway includes two series of VoIP gateways.
The S-series gateway is equipped with a four port Ethernet switch and built-in nat router function.
This provides Internet access entire network for you with only one IP address. Otherwise, it provides
high voice quality and optimized packet voice streaming over managed and public (Internet) IP
networks.
Otherwise, bandwidth management function was started by Gateway Kernel automatically in order to
guarantee the quality of voice.
Model
FXO Port FXS Port LAN Port WAN Port Smart-QoS Build in NAT H.323 SIP
S400
4 4 1 √
√ √
S401
1 3 4 1 √
√ √
S402
2 2 4 1 √
√ √
S404
4 4 1 √
√ √
S200
2 4 1 √
√ √
S201
1 1 4 1 √
√ √
1.2 Front Panel LED Indicators & Rear Panels
1.2.1 Front Panel LED Descriptions
------------------------------------------------------------------------------------
LED State Description
------------------------------------------------------------------------------------
1. POWER On GW is power ON
Off GW is power Off
-------------------------------------------------------------------------------------
2. WAN port On GW network connection established
Flashing Data traffic on cable network
Off Waiting for network connection
-------------------------------------------------------------------------------------
3. LAN port On LAN is connected successfully
Flashing Data is transmitting
Off Ethernet not connected to PC
-------------------------------------------------------------------------------------
4. Phone Off Telephone Set is On-Hook
Flashing Ring Indication
On Telephone Set is Off-Hook
-------------------------------------------------------------------------------------
5.LINE Off Line is not enabled
On Line is busy