User manual

4.4.4 Dialing Plan
Overview of the Dialing Plan
The “Dialing plan” need setting when the user use the method of pear-to-pear VoIP call. The
VoIP call has two kinds of directions: Outbound (call out) and Inbound (call in).
Note: All dialing plans were still effective when the gateway registered Gatekeeper (GK
mode).
z In the “Outgoing Dial Plan Configurations” settings:
 “Outbound number” is the leading digits of the call out dialing number.
 “Length of Number” has two text fields need filled: “Min Length” and “Max Length” is the
min/max allowed length you can dial.
 “Delete Length” is the number of digits that will be stripped from beginning of the dialed
number.
 “Add Digit Number” is the digits that will be added to the beginning of the dialed number.
 “Destination IP Address” is the IP address of the destination Gateway that owns this phone
number.