User manual

CID Number:
The CID number is the phone caller ID number.
4.4.4 Let GW Register to H.323 Gatekeeper (If user does not have Gatekeeper, Please go to 4.2.3:
Dialing Plan)
 Select “H.323 Protocol”
 The “H323-ID” is the H323-ID of this gateway when registering to the gatekeeper
 The “Gatekeeper-ID” is the gatekeeper’s ID; usually do not need to set this field unless the
gatekeeper must need this value.
 Gatekeeper backup: There are two gatekeeper address fields, one is primary, the other secondary. If
this gateway does not want to register to any gatekeeper, just set value 0 to the primary gatekeeper
address. If the primary gatekeeper address is not 0, the gateway will register to the primary
gatekeeper. If the second gatekeeper is not 0, the gateway will try to register to the second gatekeeper
when failed to register to primary gatekeeper, i.e. if both the primary gatekeeper and second
gatekeeper addresses are present, the gateway will try to register to these two gatekeepers
respectively. The gateway can have the gatekeeper backup function by this way.
 Voice Caps Prefix: Let user set prefix number in RRQ nonstandard voicecap entry.
 Adjustable RAS and Q.931 port setting: In H.323 standard the RAS default port number is 1719
and Q.931 is 1720. The VoIP gateway provides user to change Q.931 port number and RAS port
number to meet the network environment..
 Register Status:
4.4.3 Let GW Register to SIP Proxy Server (If user does not have Gatekeeper, Please go to 4.2.4:
Dialing Plan)
 Select “SIP Protocol”
 SIP Proxy Server IP Address /sip port: Please fill out the IP address of the SIP proxy Server which
Gateway need to register to and the sip port (The standard SIP socket port is 5060)
 Register interval: This is the register period that gateway need to send a register request to SIP
Proxy Server
.

SIP Authentication: This is the register period that gateway need to send a register request to SIP
Proxy Server
.
