User manual

Bridge Mode:
Select S series Gateway as bridge.
NAT mode:
LAN IP Network Configuration
IP Address: Private IP address for connecting to a local private network (Default:
192.168.0.254).
Subnet Mask: Netmask for the local private network (Default: 255.255.255.0/24).
3.3 VoIP Call Protocol Setup
Step1 : configure VoIP Call Signal Protocols :
User could select H.323 or SIP Protocol, and click “select”
Step2 : configure the numbering with phone/line ports.
Phone Number:
The representation number is the phone number of the telephone that is connected to Phone port.
Line Number:
Line ports are connected to the extension ports of the PBX system or the PSTN line. They have a