User manual

support the WAN interface for Internet access and remote access. The following
sections will explain more details of WAN Port Internet access and broadband access
setup. When you click “WAN Port Type Setup” from within the Wizard Setup, the
following setup page will be shown.
Three methods are available for Internet Access.
Fixed IP User:
If you are a leased line user with a fixed IP address, fill out the
following items with the information provided by your ISP.
IP Address: check with your ISP provider
Netmask: check with your ISP provider
Default Gateway: check with your ISP provider
ADSL Dial-up User (PPPoE Enable)
Some ISPs provide DSL-based service and use PPPoE to establish
communication link with end-users. If you are connected to the Internet
through a DSL line, check with your ISP to see if they use PPPoE. If they do,
you need to select this item.