User manual

15: Configuring a 3G/4G connection
_______________________________________________________________________________________________________
Figure 40: The common connectivity page
Ensure the General Setup tab is selected.
For single SIM implementation, in the SIM drop down menu, select SIM 1.
Enter the APN information and the PAP/CHAP username and password.
Click Save & Apply.
To enable 3G/4G connection to connect on boot up, select the Advanced
Settings tab.
Select Bring up on boot.
Click Save & Apply.
To check for connectivity, return to the top menu, and under Network ->
Interfaces, the WAN interface will show receive and transmit packets and an IP
address.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 98 of 255