User manual

14: Configuring WiFi
_______________________________________________________________________________________________________
option txpower '17'
option country 'US'
config wifi-iface
option device 'radio0'
option ssid 'Remote-AP'
option mode 'sta'
option network 'WCLIENT'
option encryption 'psk2'
option key 'testtest'
To view UCI commands, enter:
uci show network
network.WCLIENT=interface
network.WCLIENT.proto=dhcp
uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type=mac80211
wireless.radio0.channel=11
wireless.radio0.phy=phy0
wireless.radio0.hwmode=11ng
wireless.radio0.htmode=HT20
wireless.radio0.ht_capab=SHORT-GI-40 TX-STBC RX-STBC1 DSSS_CCK-40
wireless.radio0.txpower=17
wireless.radio0.country=US
wireless.@wifi-iface[0]=wifi-iface
wireless.@wifi-iface[0].device=radio0
wireless.@wifi-iface[0].ssid=Remote-AP
wireless.@wifi-iface[0].mode=sta
wireless.@wifi-iface[0].network=WCLIENT
wireless.@wifi-iface[0].encryption=psk2
wireless.@wifi-iface[0].key=testtest
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 96 of 255