User manual

14: Configuring WiFi
_______________________________________________________________________________________________________
Figure 37: The WClient interfaces page
In the Protocol drop down menu, select DHCP client. A ‘Switch Protocol’ button
appears.
Click Switch Protocol.
Click Save & Apply.
Note: The router will now restart the network package. It may take up to one
minute for connectivity to the router to be restored.
14.5 Configuring WiFi via UCI
14.5.1 Configuring Wi-Fi in AP mode on an existing Ethernet interface
The configuration files are stored on:
• Network file /etc/config/network
• Wireless file /etc/config/wireless
To view the configuration file, use the command:
uci export network
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 91 of 255