User manual

14: Configuring WiFi
_______________________________________________________________________________________________________
14 Configuring WiFi
This section explains how to configure WiFi on a Virtual Access router using the
web interface or via UCI.
14.1 Configuring WiFi through the web interface
WiFi can act as an Access Point (AP) to another device in the network or it can
act as a client to an existing AP.
You can configure WiFi in AP mode in two different ways:
• on an existing interface, or
• on a new interface.
14.2 Configuring WiFi in AP mode on an existing Ethernet interface
In the top menu, select Network ->Interfaces. The Interface Overview page
appears.
Figure 20: The interface overview page
In the interface overview page, click Edit to select the Ethernet interface that
will be bridged into the router’s WiFi AP. The Common Configuration page
appears.
In the Common Configuration page select the Physical Settings tab.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 78 of 255