User manual

13: BGP (Border Gateway Protocol)

_______________________________________________________________________________________________________

package bgpd

config routing 'bgpd'

option enabled 'yes'

option router_id '3.3.3.3'

option asn '1'

list network '11.11.11.0/29'

list network '192.168.103.1/32'

config peer

option route_map_in 'yes'

option ipaddr '11.11.11.1'

option asn '1'

option route_map 'ROUTEMAP'

config routemap 'ROUTEMAP'

option order '10'

option permit 'yes'

option match_type 'ip address'

option match '192.168.101.1/32'

option set_type 'ip next-hop'

option set '150'

root@VA_router:~# uci show bgpd

bgpd.bgpd=routing

bgpd.bgpd.enabled=yes

bgpd.bgpd.router_id=3.3.3.3

bgpd.bgpd.asn=1

bgpd.bgpd.network=11.11.11.0/29 192.168.103.1/32

bgpd.@peer[0]=peer

bgpd.@peer[0].route_map_in=yes

bgpd.@peer[0].ipaddr=11.11.11.1

bgpd.@peer[0].asn=1

bgpd.@peer[0].route_map=ROUTEMAP

bgpd.ROUTEMAP=routemap

bgpd.ROUTEMAP.order=10

_______________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 2.4 Page 76 of 255