User manual

13: BGP (Border Gateway Protocol)
_______________________________________________________________________________________________________
case of IP address and BGP
Community values is parsed as list
of items to match.
Set Option Dropdown
Menu
No None Available options are:
None, IP Next Hop, Local
Preference, MED, Route Weight,
BGP MED, AS path to Prepend,
BGP Community.
Set Value Format depends on the Set Option
chosen.
When you have made your changes, click Save.
13.3 Configure BGP neighbours
In the BGP neighbours section, click Add to configure BGP neighbours.
Figure 18: The BGP neighbours section
Name Type Required Default Description
IP Address Integer Yes None Sets the IP address of the
neighbour.
Autonomous
System Number
Integer Yes None Sets the ASN of the remote peer.
Route Map
String
No
None
Sets the route map name.
Route Map
Direction
Dropdown
Menu
No None Tells in which direction the route
map should be applied. Available
options are: in or out.
Click Save & Apply.
13.4 Routes statistics
To view routes statistics, in the top menu click Status -> Routes. The routing
table appears.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 74 of 255