User manual

13: BGP (Border Gateway Protocol)
_______________________________________________________________________________________________________
byte format 0.0.0.0.
Autonomous
System Number
Integer Yes None Defines ASN for local router.
Network Integer Yes None
Sets network that will be
advertised to neighbours in prefix
format 0.0.0.0/0. Ensure network
prefix matches the one shown in
routing table. See Routes section
below.
When you have made your changes, click Save.
13.2 Optionally configure BGP route map
To configure the BGP route map, on the Global Settings page scroll down to the
BG Route Map section.
Figure 16: The BGP route map section
Type in a name for the BGP Route map Name and then click Add. The
ROUTEMAP configuration section appears.
Figure 17: The routemap section
Name Type Required Default Description
Order Integer Yes None Route Map sequence number
Policy Type Dropdown
Menu
Yes Permit Permits or denies matched values
Match Type Dropdown
Menu
Yes IP address Available options are:
IP Address, IP Next-Hop, AS-Path,
Route Metric, BGP Community
Match Value Yes None Format depends on Match Type. In
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 73 of 255