User manual

11: VLAN configuration

_______________________________________________________________________________________________________

11.4 VLANs UCI interface

You can configure VLANs through CLI.

The VLAN configuration file is stored at:

/etc/config/portvlan

~# uci export portvlan

package portvlan

config vlan

option vlanid '1'

option name 'vlan1'

option ipaddr '192.168.1.1'

option netmask '255.255.255.0'

option isolate 'no'

config vlan

option vlanid '2'

option name 'vlan2'

option ipaddr '192.168.2.1'

option netmask '255.255.255.0'

option vlanprio '5'

option isolate 'yes'

config port

option port 'A'

option vlans '1'

config port

option port 'B'

option vlans '2'

config port

option port 'C'

option trunk 'yes'

option vlans 'all'

config nat_vlan 'nat_vlan'

option nat_vlanid '1'

_______________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 2.4 Page 66 of 255