User manual

11: VLAN configuration
_______________________________________________________________________________________________________
Name Type Required Default Description
802.1Q VLAN ID
Numeric
value
No Blank
Defines VLAN number. The VLAN
will be referred to using this
number.
VLAN Priority
Numeric
value
No Blank
Specifies 802.1p VLAN priority tag
on trunk links.
Isolate From
Trunk
Boolean No Blank
Defines whether to isolate hosts
from each other within the same
VLAN. Hosts will still be able to
communicate with the router.
VLAN Name
Text
Yes
Blank
Configures VLAN name.
IP Address
IP
Address
Yes Blank
Configures network mask address
to be used on this VLAN.
Netmask
IP
Address
Yes Blank
Configures network mask address
to be used on this VLAN.
Default Gateway
IP
Address
No Blank
Configures default gateway
address to be used on this VLAN.
Table 11: VLAN definition fields and their descriptions
11.3 Port description
The port description section is used to segment the switch accordingly to your
VLAN requirements. You can specify what physical ports you want to assign to
which VLANs, or whether you want to configure a trunk port instead.
Figure 13: The port description section
Name Type Required Default Description
Switch Port Text Yes Blank
Specifies which physical port on
the front panel of the router will be
assigned to which VLAN.
Is Trunk Port Boolean NO Blank
Configures the port as a trunk
port.
VLAN IDs
Numeric
value/text
Yes Blank
Specifies what VLANs will be
assigned to a physical port on the
router. You must use VLAN ID to
specify which VLANs or ‘all’ to
configure a port as trunk interface.
Table 12: The port description fields and their descriptions
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 65 of 255