User manual

10: DHCP server and DNS configuration
_______________________________________________________________________________________________________
not interface.
leasefile file path no (none) Stores DHCP leases in this file.
Local string no (none)
Looks up DNS entries for this
domain from /etc/hosts. This
follows the same syntax as
server entries, see the man
page.
localise_queries boolean no 0
Chooses IP address to match the
incoming interface if multiple
addresses are assigned to a host
name in /etc/hosts.
logqueries boolean no 0
Logs the results of DNS queries,
dump cache on SIGUSR1.
nodaemon boolean no 0
Does not daemonize the
dnsmasq process.
Nohosts boolean no 0
Does not read DNS names from
/etc/hosts.
nonegcache boolean no 0
Disables caching of negative "no
such domain" responses.
noresolv boolean no 0
Does not read upstream servers
from /etc/resolv.conf.
notinterface
list of interface
names
no (none)
Interfaces dnsmasq should not
listen on. Note: individual
interface sections will be
appended if ignore is set there.
nonwildcard boolean no 0
Only listens on configured
interfaces, instead of on the
wildcard address.
Port port number no 53
Defines listening port for DNS
queries, disables DNS server
functionality if set to 0.
queryport integer no (none)
Uses a fixed port for outbound
DNS queries.
readethers boolean no 0
Reads static lease entries from
/etc/ethers, re-read on SIGHUP.
Resolvfile file path no
/etc/
resolv.
conf
Specifies an alternative resolv
file.
server list of strings no (none)
Specifies list of DNS servers to
forward requests to. See the
dnsmasq man page for syntax
details.
strictorder boolean no 0
Obeys order of DNS servers in
/etc/resolv.conf.
tftp_root directory path no (none) Specifies the TFTP root directory.
rebind_protection boolean no 1
Enables DNS rebind attack
protection by discarding
upstream RFC1918 responses.
rebind_localhost boolean no 0 Allows upstream 127.0.0.0/8
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 60 of 255