User manual

9: Management configuration settings
_______________________________________________________________________________________________________
Figure 10: The system page
In the Hostname field, type a relevant host name.
In the Timezone dropdown menu, select the relevant time zone.
Click Save.
Name Type Required Default Description
hostname string no (none)
Enables the hostname for
this system.
buffersize integer no kernel specific
Specifies the size of the
kernel message buffer.
conloglevel integer no 7
Sets the maximum log
level for kernel messages
to be logged to the
console. Only messages
with a level lower than this
will be printed to the
console.
cronloglevel integer no 5
Specifies the minimum
level for cron messages to
be logged to syslog. 0
prints all debug messages;
8 will log command
executions; and 9 or
higher will only log error
messages.
Klogconloglevel integer no 7
Specifies the maximum log
level for kernel messages
to be logged to the
console. Only messages
with a level lower than this
will be printed to the
console. Identical to
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 46 of 255