User manual

9: Management configuration settings
_______________________________________________________________________________________________________
root@VA_router:~# uci show monitor
monitor.main=keepalive
monitor.main.enable=yes
monitor.main.interval_min=1
monitor.main.dev_reference=mikesamazondev
monitor.main.monitor_ip=10.1.83.36
root@VA_router:~# uci export monitor
package 'monitor'
config 'keepalive' 'main'
option 'enable' "yes"
option interval_min "1"
option 'dev_reference' "mikesamazondev"
list 'monitor_ip' "10.1.83.36"
9.3 System settings
The system section contains settings that apply to the most basic operation of
the system, such as the host name, time zone, logging details, NTP server and
language and web style.
This section details the configuration sections and parameters in various
configuration files which are required to have the device perform basic routing
activities on a network.
The system configuration contains basic settings for the whole router. Larger
subsystems such as the network configuration, the DHCP and DNS server, and
similar, have their own configuration file.
9.3.1 Configuring a router’s host name
The host name appears in the top left hand of the menu of the interface. It also
appears when you open a Telnet or SSH session.
Note: this document uses the hostname ‘VA_router’ throughout.
You can set your system setting options in the system section.
To configure the router’s hostname, in the top menu, select System -> system.
The System page appears.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 45 of 255