User manual

9: Management configuration settings
_______________________________________________________________________________________________________
list SecureFileServer integer no no
Specifies the IP address of
Secure Activator that uses
port 443.
ActivatorDownloadPath string yes (none)
Specifies the url on
Activator to which the
client should send
requests.
SecureDownload boolean no no
Enables Secure Download
(port 443).
PresentCertificate Enabled boolean no no
Specifies if the client
presents its certificate to
the server to identify itself.
ValidateServer Certificate
FieldEnabled
boolean no no
Specifies if the client
validates the server
certificate as per
ServerCertificateField and
FieldValueCertificateFormat
ServerCertificate Field string no CN
Defines the field in the
server certificate that the
client should check.
ServerCertificate
FieldValueCertificateFormat
string no PEM
Specifies the value the
client expects to see in the
specified field in the server
certificate.
A sample httpclient configuration is shown below.
root@VA_router:~# uci show httpclient
httpclient.default=core
httpclient.default.Enabled=yes
httpclient.default.FileServer=10.1.83.36:80 10.1.83.37:80
httpclient.default.SecureFileServer=10.1.83.36:443 10.1.83.37:443
httpclient.default.ActivatorDownloadPath=/Activator/Sessionless/Httpserver.
asp
httpclient.default.SecureDownload=no
httpclient.default.PresentCertificateEnabled=no
httpclient.default.ValidateServerCertificateEnabled=no
httpclient.default.CertificateFile=/etc/httpclient.crt
httpclient.default.CertificateFormat=PEM
httpclient.default.CertificateKey=/etc/httpclient.key
root@VA_router:~# uci export httpclient
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 43 of 255