User manual

9: Management configuration settings
_______________________________________________________________________________________________________
root@VA_router:/# uci export autoload
package 'autoload'
config 'core' 'main'
option 'Enabled' "yes"
option 'StartTimer' "10"
option 'RetryTimer' "30"
option 'NumberOfRetries' "5"
option 'BackoffTimer' "15"
option 'BootUsingConfig' "altconfig"
option 'BootUsingImage' "altimage"
config 'entry'
option 'Configured' "yes"
option 'SegmentName' "altconfig"
option 'RemoteFilename' "\$\$.ini"
config 'entry'
option 'Configured' "yes"
option 'SegmentName' "altimage"
option 'RemoteFilename' "\$\$.img"
config 'entry'
option 'Configured' "yes"
option 'SegmentName' "config1"
option 'RemoteFilename' "\$\$.vas"
9.2 Httpclient - Activator configuration
This section contains the settings for the http client used during activation and
active updates of the device.
The httpclient core section configures the basic functionality of the module used
for retrieving files from Activator during the Activation process. It contains the
following settings.
Name
Type
Required
Default
Description
Enabled
boolean
yes
yes
Enables the http client.
list FileServer integer yes none
Specifies the IP address of
Activator that uses http
port 80.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 42 of 255