User manual

7:File system
_______________________________________________________________________________________________________
root@VA_router:~# cp /etc/config2/* /etc/config1/*
7.1.8 Editing files
The config can be edited using uci commands or via the web GUI.
7.1.9 Processes and jobs
To view scheduled jobs, enter:
root@VA_router:~# crontab -l
Note: currently there are no scheduled jobs.
To view running processes, enter:
root@VA_router:~# ps
PID USER VSZ STAT COMMAND
1 root 1536 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW< [khelper]
... 1796 root 1540 S /usr/bin/ifplugd -i eth0 -I -l -x lan2
1879 root 7352 S /sbin/dsl_cpe_control -i -n /sbin/dsl_notify.sh -
a /tmp/dsl.scr
2017 root 1540 S /usr/bin/ifplugd -i eth1 -I -l -x lan
2178 root 1540 S /usr/bin/ifplugd -i eth2 -I -l -x lan3
2297 root 2256 S {va_hdl.lua} /usr/bin/lua /usr/sbin/va_hdl.lua
$.ip ip
To kill a process, enter the PID:
root@VA_router:~# kill 2297
7.1.10 System information
General information about software and configuration used by the router is
displayed just after login or is available if you enter the following commands.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 29 of 255