User manual

31: Diagnostics
_______________________________________________________________________________________________________
root@VA_router:~# sip show channels stats
Peer Call ID Duration Recv: Pack Lost ( %) Jitter
Send: Pack Lost ( %) Jitter
10.1.23.15 4abaa449705 00:00:08 0000000426 0000000000 ( 0.00%) 0.0000
0000000391 0000000000 ( 0.00%) 0.0002
1 active SIP channel
To exit asterisk CLI, enter:
~# exit
31.11.3 ISDN LED status
The ISDN port has two LEDs indicating the status of the audio channels in use.
ISDN top LED
On Audio channel is up (dial tone or call in progress)
Off Audio channel is inactive
ISDN bottom
LED
On Audio channel is up (dial tone or call in progress)
Off Audio channel is inactive
31.12 IPSec diagnostics
Virtual Access routers use the strongSwan package for IPSec.
To view IPSEC configuration on the router, enter:
root@VA_router:~# uci export strongswan
To restart strongSwan, enter:
root@VA_router:~# etc/init.d/strongswan restart
To view IPSEC status, enter:
root@VA_router:~# ipsec statusall
To view a list of IPSEC commands, enter:
root@VA_router:~# ipsec –help
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 249 of 255