User manual

31: Diagnostics
_______________________________________________________________________________________________________
Available commands:
start Start the service
stop Stop the service
restart Restart the service
reload Reload configuration files (or restart if that fails)
enable Enable service autostart
disable Disable service autostart
status Get DSL status information
lucistat Get status information in lua friendly format
To view the current status of the ADSL interface, enter:
root@VA_router:~# /etc/init.d/dsl_control status
Chipset: Lantiq-Danube 1.5
Line State: UP [0x801: showtime_tc_sync]
Data Rate: 2.280 Mb/s / 291 Kb/s
Line Attenuation: 6.3dB / 3.3dB
Noise Margin: 31.1dB / 35.9dB
Line Uptime: 2d 18h 8m 30s
To restart the ADSL interface, enter:
root@VA_router:~# /etc/init.d/dsl_control restart
31.11 ISDN pseudowire diagnostics
31.11.1 Packages
ISDN pseudowire uses two packages: Asterisk and LCR.
To view configuration of the LCR package, enter:
root@VA_router:~# uci export lcr
package lcr
config lcr 'main'
option enable '1'
list msn '384740'
list msn '384741'
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 247 of 255