User manual

30:Configuring SLA for a router
_______________________________________________________________________________________________________
slad.main.enable=yes
slad.main.roundtrip_timeout_msec=5000
slad.main.interface=lan
slad.main.destination_host_ip_address=10.1.1.2
slad.main.destination_udp_port=53
slad.main.bin_restart_period_msec=3600000
slad.main.max_bin_count=73
30.3 SLA statistics
Type the command line sla to show all available statistic options.
Figure 102: Output from the command line sla
Option Description
current Shows current sla bin
all Shows all bin stored on the router
oldest
Shows the oldest sla bin stored
newest
Shows two newest valid bins
newest N Shows the newest valid bin
range YYYYMMDDHH-YYYYMMDDHH Shows all bins that match specified time range
Type the command sla current to show current statistics.
Figure 103: Output from the command line sla current
Type the command sla newest to show the newest statistics.
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 225 of 255