User manual

28: Event system
_______________________________________________________________________________________________________
va_eventd.@conn_tester[0].ping_success_duration_sec=10
va_eventd.@conn_tester[1]=conn_tester
va_eventd.@conn_tester[1].name=smtp_server
va_eventd.@conn_tester[1].enabled=1
va_eventd.@conn_tester[1].type=link
va_eventd.@conn_tester[1].link_iface=eth0
va_eventd.@target[0]=target
va_eventd.@target[0].name=syslog
va_eventd.@target[0].enabled=yes
va_eventd.@target[0].type=syslog
va_eventd.@target[0].target_addr=192.168.100.254:514
va_eventd.@target[0].conn_tester=mon_server
va_eventd.@target[1]=target
va_eventd.@target[1].name=email
va_eventd.@target[1].enabled=yes
va_eventd.@target[1].type=email
va_eventd.@target[1].smtp_addr=89.101.154.148:465
va_eventd.@target[1].smtp_user=[e-mail]
va_eventd.@target[1].smtp_password=******
va_eventd.@target[1].use_tls=yes
va_eventd.@target[1].tls_starttls=no
va_eventd.@target[1].tls_forcessl3=no
va_eventd.@target[1].timeout_sec=10
va_eventd.@target[1].from=[e-mail]
va_eventd.@target[1].to=[e-mail]
va_eventd.@target[1].subject_template=%{severityName} %{eventName}!!!
va_eventd.@target[1].body_template=%{eventName} (%{class}.%{subclass})
happened!
va_eventd.@target[1].conn_tester=smtp_server
va_eventd.@target[2]=target
va_eventd.@target[2].name=snmp
va_eventd.@target[2].enabled=yes
va_eventd.@target[2].type=snmptrap
va_eventd.@target[2].community=public
va_eventd.@target[2].target_addr=192.168.100.254
va_eventd.@target[2].agent_addr=192.168.100.1
va_eventd.@target[2].conn_tester=mon_server
_______________________________________________________________________________________________________
© Virtual Access 2015
GW1000 Series User Manual
Issue: 2.4 Page 212 of 255