User manual

26: Terminal Server

_______________________________________________________________________________________________________

option speed 115200

# serial device word size (5,6,7,8)

option wsize 8

# serial device parity (0=none, 1=even, 2=odd)

option parity 0

# serial device number of stop bits (1 or 2)

option stops 1

# serial from control mode (0=none, 1=RTS CTS, 2=XONXOFF)

option fc_mode 1

# time in milliseconds to start re-connecting after setting DTR low

option disc_time_ms 5000

# TCP server mode

option server_mode 1

# TCP listen port for server mode

option listen_port 999

# UDP mode

option udpMode 0

# UDP port for UDP mode

option udpPort 0

Each Terminal Server port must be associated with a specific serial port device.

For example, you can configure port 1 as:

_______________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 2.4 Page 193 of 255